Removing And Installing Components; Recommended Tools; Removing The Cover; Installing The Cover - Dell DES12314 Owner's Manual

Small form factor
Table of Contents

Advertisement

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Recommended Tools

The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips screwdriver
Small plastic scribe

Removing the Cover

Before Working Inside Your Computer .
1.
Follow the procedures in
2.
Pull up the cover-release latch at the side of the computer.
3.
Lift the cover upward to a 45–degree angle and remove it from the computer.

Installing the Cover

1.
Place the cover on the chassis.
2.
Press down on the cover till it clicks into place.
After Working Inside Your Computer .
3.
Follow the procedures in
8
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optiplex 7010D03sOptiplex 9010

Table of Contents