Tiling; Transparent Wipes - High End Systems DL.3 User Manual

Tiling

Effect Mode parameter DMX value = 48
Tiling varies the number of times a media file is applied as a texture to an object. This effect
works best on objects that have an undisrupted surface area.
Modifier 1: Adjusts the size and number of tiles along the x axis. A value of 128 (50%) =
no adjustment. Values below the midpoint size a single image to 0 = maximum image
magnification. Values above the midpoint increase number of images displayed to 255 (100%)
= maximum.
Modifier 2: Adjusts the size and number of tiles along the x axis. A value of 128 (50%) = no
adjustment. Values below the midpoint size a single image to 0 = maximum image magni-
fication. Values above the midpoint increase number of images displayed to 255 (100%) =
maximum.
Modifier 3: Not Used
NOTE: The Tiling effect implemented on Effect 1 overrides tiling on Effect 2.

Transparent Wipes

Effect Mode parameter DMX value = 33
Transparent wipes let you open
one graphic to reveal another
graphic behind it. You can select
from six options and the centerline
of the effect.
Modifier 1: Adjusts the area of
the wipe from the smallest at a
value of 0 to the largest at a value
of 255 (100%).
Modifier 2: Selects the center of a
wipe effect's separation
Modifier 3: Selects the wipe
option. Each option occupies a
portion of the DMX value range
(see table).
DL.3 Digital Light User Manual
DMX
Modifier 3: Wipe Option
Value
Rectangle wipes from
1-42
center out horizontally
Rectangle wipes from
43-84
edges out horizontally
Wipes from center out
85-126
vertically
Wipes from edges out
127-170
vertically
Cross shape wipes from
171-212
center out
Box shape wipes from
212-255
edges outward
CHAPTER 13
Effect Mode Options Descriptions
Object Effect Global Effect
Object Effect Global Effect
177