Faux Tile - High End Systems DL.3 User Manual

Faux Tile

Visual Mode parameter DMX value = 17
This options creates divides the image into a grid of tiles with simulated lighting at the edges.
The color of the center pixel in each cell defines the solid color for that tile. You can the number
and spacing of tile, choose between a black and white grid and adjust color peaking.
Modifier 1: Controls the number of tile. The default DMX value of 0 = a 10 x 10 grid of tiles.
Increasing the DMX value increases grid divisions to a maximum of 100 x 100 tiles at a value of
255 (100%).
Note: A small number of larger tiles will also result in reduced color variation.
Modifier 2: Adjusts the grid thickness around each tile. DMX values below the midpoint of the
range increase the spacing between tiles on a black background from O to a maximum space
between tiles at a DMX value of 127. Values above the midpoint increase the spacing between
tiles on a white background to a maximum space between tiles at a DMX value of 255 (100%).
Original Content
Visual Mode Parameter DMX value = 17
Modifier 1 = 255 (100%), Modifier 2 = 138
DL.3 Digital Light User Manual
Graphic Functions: Opacity and Effects
Visual Mode Parameter DMX value = 17
Modifier 1 = 255 (100%), Modifier 2 = 0
CHAPTER 9
87