Quick Start With A Wholehog Console - High End Systems DL.3 User Manual

CHAPTER 4
DMX Programming Basics and Quick Start

Quick Start with a Wholehog Console

After Setting up and Configuring your media server as outlined in Chapter 2, use the following
steps to get to the point of displaying output.
Step 1: In the Fixture Schedule or Add Fixtures window of Wholehog software, Add 1 motion, 1
global, and 3 graphic "fixtures" for each complete DL.2 unit, or 1 global, and 3 graphic "fixtures"
for each complete Axon unit.
Step 2: Assign user numbers for these items. Set up user numbers 1-5 that correspond to DL.2
fixture number 1, where user number 1 is the motion, 2 is the global, and 3-5 the graphic
fixture types. Axon media servers will have user number 1-4 where user number one is global
and 2-4 the graphic fixture types. Patch the motion first, the global second, and the graphic
fixture types last.
DL.3 Digital Light User Manual 43