Fixture Tab; Projector Settings; Fixture Settings; Display Settings - High End Systems DL.3 User Manual

Fixture Tab

Projector Settings

Configuration Item
Projector Input
Projector In by DMX
SVideo Input
Ceiling Mode
Rear Display
Lens Type

Fixture Settings

Configuration Item
Pan Invert
Tilt Invert
Pan/Tilt Swap
Data Loss Timeout

Display Settings

Configuration Item
Display Invert
Display Level
Display Opacity
DL.3 Digital Light User Manual
Configuration Value Options
External accepts input from an external video source
Internal accepts input from the graphics engine
Yes allows projector input to be switched via DMX
No disables projector input switching via DMX
On accesses the projector menu to rotate the image 180°
Off reverts to original orientation
On accesses projector menu to invert the projected image
Off reverts to original orientation
Select currently installed lens from Standard, Long Throw, Ultra
Long Throw, or Wide Angle for DL.3 fixtures. Note: This option is
greyed out for DL.2 fixtures.
Configuration Value Options
On Inverts pan positioning
Off reverts to default position
On Inverts Tilt positioning
Off reverts to default position
On swaps pan and tilt positioning
Off reverts to default positioning
Closes iris when system stops receiving DMX data:
Long = 5 minute delay
Short = 5 second delay
Configuration Value Options
On manually inverts display,
Off reverts to default display orientation,
Auto automatically inverts display when fixture is turned more than 90
degrees vertically.
Off turns off display. Touching any button turns it back on.
Dim lowers the brightness level
Bright = full brightness level
Preview = displays currently selected content
0-100 sets the preview display opacity from 0-100%
Content Management Application (CMA)
CHAPTER 16
209