Operation
If you want to offset the side margins of your document to the left or to the right when scanning
with your flat scanner:
Adjust the offset of the left/right margins (in 0.5mm steps mm) using keys
Validate by pressing the OK key.
If you want to offset the side margins of your document to the left or to the right.
Adjust the offset of the left/right margins (in 0.5mm steps mm) using keys
Validate by pressing the OK key.
To manage new copy modes on the one hand (Mosaic/Banner, Identity Card copy) and to simplify
the local copy slip on the other hand, you will be led to change the order of the various options,
i.e.:
• ·enter least used options last,
• ·enter as early as possible any options whose selection will condition the absence or pre-
sence of other options.
The various fields of the local copy slip are described below in order of appearance.
Number of copies
Enter the slip and go to the first option: selection of the number of copies (except if the slip is
entered via the "number" + OK key combination, in which case the second option is directly
accessed):.:
Mode selection
Directly go the copy mode selection: normal (default), Mosaic/Banner or Identity Card mode.
Case of a flatbed scan:
Case of an ADF scanner:
855 OK - ADVANCED FCT / SCAN. & PRINT / FLATBED MARG
856 OK - ADVANCED FCT / SCAN. & PRINT / PRINTER MARG
L
OCAL
NUMBER OF COPIES
1>1 PAGE TO 1
2 1 PAGE TO 4
3 1 PAGE TO 9
4 IDENT. CARD
1>1 PAGE / 1
2 2 PAGES / 1
3 4 PAGES / 1
C
M
OPY
ENU
normal copy
banner 1 to 4
banner 1 to 9
identity card copy
normal copy
mosaic 2 to 1
mosaic 4 to 1
5-17
and
.
and
.