Table of Contents
Advertisement
Setting your machine
Transmission report
You may print a transmission report for all communications over the telephone network (STN).
You may choose between more than one criteria for printing reports:
•
WITH
tely abandoned (but there is only one report per request),
•
WITHOUT
place in its log (refer to paragraph Logs, page 5-25),
•
ALWAYS
•
ON ERROR
With each transmission report from memory, a reduced version of the first page is automatically
reproduced.
To select the report type:
Select the required option
choice with OK.
Document feed type
You may choose the way you want to feed your documents:
• from memory, transmission will take place only after memory storage of the document and
dialling. It allows you to get your originals back quickly to free up the machine.
• from the feeder of the sheet-feed scanner (refer to paragraph Document depositing,
page 5-1), transmission will occur after dialling. It allows transmission of larger documents.
To select the way you want to feed your documents:
Select the option
Remark
:
in feeder mode, the reduced image will not appear on the transmission report.
Economy period
This function allows you to defer a fax transmission to "off-peak hours" and thus reduce the cost
of your communications.
The economy period, via the telephone network (at off-peak hours), is preset by default from
7.00 pm to 7.30 am. Nevertheless you may change this time slot.
Modifying the economy period:
Enter the hours of the new economy period and confirm your selection with the key OK.
Using the economy period:
Enter the call number and confirm with OK.
: a report is given when the transmission was properly performed or when it is comple-
: no transmission report, however, your fax will note all transmissions that took
: a report is printed with each transmission,
: a report is printed only if the transmission failed or is abandoned.
WITH
or
MEMORY
231 OK - SETUP / SEND / SEND REPORT
,
,
WITHOUT
ALWAYS
232 OK - SETUP / SEND / MEMORY SEND.
and validate your choice with OK.
FEEDER
233 OK - SETUP / SEND / ECO PER.
3-5
or
and confirm your
ON ERROR
32 OK - FAX / ECO TRANS.
Advertisement
Table of Contents
