Entering Text - Panasonic Lumix DMC-GX7 Operating Instructions For Advanced Features

Preparation

Entering Text

It is possible to enter babies' and pets' names and the
locations when recording. When a screen that looks like the
one on the right is displayed, you can enter characters. (Only
alphabetical characters and symbols can be entered.)
1
Press 3/4/2/1 to select text and then press [MENU/SET] to
register.
•
Move the cursor to [
(capitals), [a] (lower case), [1] (numbers) and [&] (special characters).
•
To enter the same characters in a row, move the cursor by rotating the rear dial to the
right.
•
The following operations can be performed by moving the cursor to the item and
pressing [MENU/SET]:
–
[]]: Enter a blank
–
[Delete]: Delete a character
–
[ ]: Move the entry position cursor to the left
–
[ ]: Move the entry position cursor to the right
•
A maximum of 30 characters can be entered. (Maximum of 9 characters when setting
names in [Face Recog.])
A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (Maximum of
6 characters when setting names in [Face Recog.]).
2
Press 3/4/2/1 to move the cursor to [Set] and then press
[MENU/SET] to end text input.
•
Text can be scrolled if all of the entered text does not fit on the screen.
] and then press [MENU/SET] to switch text between [A]
61