Focus and Exposure Settings
When selecting [
You can set the focus position precisely by enlarging the screen.
•
The focus position cannot be set at the edge of the screen.
1
Select [
] and press 4.
2
Press 3/4/2/1 to set the focus position and then press [MENU/SET].
•
The assist screen for setting the focus position is displayed in an enlarged size.
•
The assist screen can also be displayed by touching the subject.
3
Move [_] to the focus position with 3/4/2/1.
•
The focus position can also be moved by touching the
screen.
•
Pressing [DISP.] will bring the focus position back to the
centre of the assist screen.
•
On the assist screen, it is also possible to record a picture
by touching [
Changing the display of the assist screen
∫
Each time the rear dial is pressed, an enlarged display switches between a windowed
screen display and a full screen display.
•
The display of the assist screen can also be switched by touching [
•
If the front dial or rear dial is rotated, the display can be enlarged/reduced up to approximately
3 to 6 times when the enlarged display is in a windowed display or up to approximately 3 to 10
times when the enlarged display is in a full screen display. The rear dial enlarges/reduces the
size at a rate of 1 time, and the front dial enlarges/reduces it at a rate of 0.1 times.
•
The display can also be enlarged/reduced by pinching out/pinching in.
]
].
154
].