Table of Contents
Advertisement
Wi-Fi/NFC
Describing method
∫
In these operating instructions, steps for setting a menu item are described as follows.
[Wi-Fi] >
[New Connection]>[Remote Shooting & View]
When "select [Smartphone]", etc. is described in a step,
perform any of the following operations.
Button operation:
Touch operation:
•
The camera cannot be used to connect to a public wireless LAN connection.
•
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
•
We strongly recommend that you set an encryption to maintain information security.
•
It is recommended to use a fully charged battery when sending images.
•
When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted. (A message such as [Communication error] is displayed.)
•
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
•
Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
•
Do not remove the memory card or battery or move to an area without any reception
while sending images.
•
The monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.
Select [Smartphone] with the cursor
button, and then press [MENU/SET].
Touch [Smartphone].
267
Advertisement
Table of Contents
