Table of Contents
Advertisement
Wi-Fi/NFC
Sending selected images ([Send Images Stored in the Camera])
1
Select the menu.
[Wi-Fi] >
[New Connection]>[Send Images Stored in the Camera]>[PC]
2
Select [Via Network] or [Direct], and connect.
3
Select the PC you want to connect to.
•
When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
4
Select the folder you want to send.
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
5
Select [Single Select] or [Multi Select].
•
To change the setting or disconnect, press [Wi-Fi].
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is cancelled when the picture is selected
again.
2 Select [OK].
•
The number of pictures that can be sent by [Multi
Select] is limited.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
Folders sorted by the sent date are created in the specified folder, and pictures are saved in
those folders.
•
If the screen for a user account and password entry appears, enter the one you set on your PC.
•
When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank
character), etc., it may not be recognised correctly. If a connection attempt fails, we
recommend that you change the computer name (or NetBIOS name) to the one consisting of
only alphanumeric characters, with a maximum of 15 characters.
(P308)
(P301)
(P266)
288
Advertisement
Table of Contents
