Table of Contents
Advertisement
Recording Modes
[One Point Color]
Set the colour to leave in
∫
Set the colour to leave in by selecting a location on the screen.
1
Press [Fn2] to display the setting screen.
•
Setting screen can also be displayed by touching in order of [
2
Select the colour you want to leave by moving the
frame with 3/4/2/1.
•
You can also select the colour you want to leave by
touching the screen.
•
Press [DISP.] or touch [Reset] to reset the frame position.
3
Press [MENU/SET] to set.
•
You can also set by touching [Set].
•
Depending on the subject, the set colour may not be left in.
[Sunshine]
This effect leaves one selected colour to emphasise
impressiveness.
Items that can be set
Amount of colour left
This effect adds a cast of light to the scene.
Items that can be set
Yellow tone/Red tone/Blue tone/White tone
Colour
•
Select the colour tone by rotating the
rear dial, and then press [MENU/SET].
Small amount of
colour
123
Large amount of
colour
] then [
].
Advertisement
Table of Contents
