Others
Monitor/Viewfinder
The Monitor/Viewfinder turns off although the camera is turned on.
•
If no operations are performed during the set time period, [Auto Monitor Off]
and the Monitor turns off.
•
When an object or your hand is positioned near the eye sensor, the Monitor display may switch
to the Viewfinder display.
The Monitor/Viewfinder is too bright or dark.
•
Check [Monitor Luminance] setting.
•
Perform [Monitor Display]/[Viewfinder].
It may flicker for an instant or the brightness of the screen may change significantly
for an instant.
•
This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
•
This may occur more often when a bright lens, such as the interchangeable lens (H-H020A), is
used for recording in brightly lit outdoor environments.
The picture is not displayed on the monitor.
•
Does the picture appear on the viewfinder?
> Press [LVF] to switch to monitor display.
•
Is the monitor switched off?
> Switch the display by pressing [DISP.].
Monitor and viewfinder do not switch when [LVF] is pressed.
•
It is only displayed on the monitor when the camera is connected to a PC or printer.
Black, red, blue and green dots appear on the Monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
The picture on the monitor shakes for a moment during recording.
•
This is not a malfunction.
If the camera is subjected to a jolt or impact, the picture on the monitor may shake for a
moment.
(P63)
(P54)
(P53)
(P63)
(P71)
361
(P55)
is activated,