Panasonic Lumix DMC-GX7 Operating Instructions For Advanced Features page 303

Table of Contents

Advertisement

Wi-Fi/NFC
If you are not sure about the WPS compatibility (connecting by [Manual
Connection])
Search for available wireless access points.
Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the
wireless access point you are using.
1
Select the wireless access point you are connecting
to.
Pressing [DISP.] will search for a wireless access point
again.
If no wireless access point is found, refer to
connecting with [Manual Input]
2
(If network authentication is encrypted)
Enter the encryption key.
For details on how to enter characters, refer to
When connecting with [Manual Input]
1
On the screen displayed in step
compatibility (connecting by [Manual Connection])", select [Manual Input].
2
Enter the SSID of the wireless access point you are connecting to, then select
[Set].
For details on how to enter characters,
3
Select the network authentication type.
For information on network authentication, see the manual of the wireless access point.
4
Select the encryption type.
The type of settings that can be changed may vary depending on the details of network
authentication settings.
Network authentication type
[WPA2-PSK]/[WPA-PSK]
[Common Key]
[Open]
5
(When an option other than [No Encryption] is selected)
Enter the encryption key.
Check the wireless access points instruction manual and settings when saving a wireless
access point.
If no connection can be established, the wireless access point's radio waves may be too weak.
"
Refer to
Message Display
Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
"
on P303.
1
of "If you are not sure about the WPS
refer to "
[TKIP]/[AES]
[WEP]
[No Encryption]/[WEP]
"
"
(P341)
and
Troubleshooting
303
"
When
"
"
Entering Text
section on P61.
"
Entering Text
section on P61.
Encryption types that can be set
"
(P355)
for details.

Advertisement

Table of Contents
loading

Table of Contents