Table of Contents
Advertisement
Preparation
Changing the Lens
By changing the lens, you will increase your picture taking-options and further your
enjoyment of the camera. Change the lens using the following procedure.
•
Check that the camera is turned off.
•
Change lenses where there is not a lot of dirt or dust. Refer to
the lens.
Attaching the lens
Preparations: Remove the lens rear cap from the lens.
•
If the body cap is fitted to the camera, remove it.
Align the lens fitting marks A and then rotate the lens in the direction of
the arrow until it clicks.
•
Do not press the lens release button B when you attach a lens.
•
Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
•
Be sure to remove the lens cap when recording.
•
Do not insert your fingers into the mount when the lens and body cap
are removed from the camera body.
•
To prevent dust or debris from adhering to internal parts of the
camera body, fit the body cap or a lens to the mount on the camera
body.
•
To prevent scratching of the contact points, fit the lens rear cap to the
lens when it is unattached or fit the lens to the camera body.
•
It is recommended to attach the lens cap or attach the MC Protector
(optional) to protect the lens surface when carrying.
P372
(P333)
22
when dirt or dust gets on
Advertisement
Table of Contents
