Focus and Exposure Settings
Easily Optimising the Brightness for a Specified
Area
(Touch AE)
Applicable modes:
You can easily optimise the brightness for a touched position. When the face of the subject
appears dark, you can brighten the screen according to the brightness of the face.
You can optimise just the brightness for a touched position or by optimising the brightness
when using Touch AF, you can optimise both the focus and brightness for the touched
position.
Optimising only the brightness for a touched position
1
Touch [ ].
2
Touch [
AE
•
The setting screen for the brightness optimisation position
is displayed.
•
[Metering Mode] is set to [
for the Touch AE.
3
Touch the subject you want to optimise the
brightness for.
•
Touching [Reset] will bring the brightness optimisation
position back to the centre.
4
Touch [Set].
Cancelling the Touch AE function
∫
Touch [
].
•
[Metering Mode] returns to the original setting, and the brightness optimisation position is
cancelled.
Not available in these cases:
•
[Touch AE] is not available in the following cases.
–
When using the Digital Zoom.
–
When [Touch AF] in [Touch Settings] of the [Custom] menu has been set to [AF+AE].
].
], which is used exclusively
AE
171
AE
(P172)