Table of Contents
Advertisement
Stabiliser, Zoom and Flash
Adjust the flash output
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select the menu.
[MENU] > [Rec]>[Flash]
2
Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].
3
Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [j3 EV] to [
•
Select [n0] to return to the original flash output.
•
[
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
•
It can be set only when [Wireless] in [Flash] is set to [OFF] and [Firing Mode] is set to [TTL].
(P224)
•
The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
(P331)
Synchronising the output of the built-in flash to the Exposure
Compensation
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to P166.
•
The [Auto Exposure Comp.] setting also applies to an external flash.
i
3 EV] in steps of [1/3 EV].
223
(P331)
Advertisement
Table of Contents
