Table of Contents
Advertisement
Others
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.
•
This message also appears when the USB connection cable is connected to the camera only.
If the other end of the USB connection cable is connected to a PC or printer, the message will
disappear. (P323,
326)
[Editing operation cannot proceed as information processing is ongoing.]
•
When there are too many image files, the currently retrieving information icon ([
[
]) may be displayed on the playback screen for a long period of time. During this time,
deletion and use of the [Playback] menu are not possible.
•
If this unit is turned off while acquiring information, only the pictures that have already
acquired the information are saved as a group. When you switch on again, the information
retrieval will restart from the same point.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or Panasonic.
•
If the battery terminal is dirty, clean it and remove any objects.
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
•
Check following regarding the wireless access point.
> The wireless access point information set on this unit is wrong. Check the authentication
type, encryption type, and encryption key.
> Power of the wireless access point is not turned on.
> Setting of the wireless access point is not supported by this unit.
•
Check the network setting of the destination.
•
Radio waves from other devices may block the connection to a wireless access point. Check
other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[No picture to send]
•
This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file format of the image to send. (P277, 281, 282, 285, 289,
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
•
Radio waves from the wireless access point are getting weak. Perform the connection closer
to the wireless access point.
•
There is no reply from the server or it has exceeded the communication processing time. Try
again after a while.
•
Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed. Reconnect the connection again.
(P303)
343
(P57)
] or
293)
Advertisement
Table of Contents
