Table of Contents
Advertisement
Stabiliser, Zoom and Flash
•
The Optical Image Stabiliser may produce operational sound or cause vibration during
its operation, but these are not malfunctions.
•
When using an optional interchangeable lens with an O.I.S. switch, it is possible to set to
enable the Optical Image Stabiliser by switching the O.I.S. switch on the lens to [ON]. (At the
time of purchase, it is initially set to [
•
When a tripod is used, we recommended that [Operation Mode] be set to [OFF].
•
We recommend taking pictures with the viewfinder when panning in [
Not available in these cases:
•
When [Panorama Shot] in Scene Guide Mode is set, [
cannot be used.
•
The stabiliser function may not be effective in the following cases. Be careful of camera jitter
when you press the shutter button.
–
When there is a lot of jitter.
–
When the zoom magnification is high.
–
When using the Digital Zoom.
–
When taking pictures while following a moving subject.
–
When the shutter speed becomes slower to take pictures indoors or in dark places.
•
The panning effect in [
–
In brightly lit places such as in broad daylight on a summer's day.
–
When the shutter speed is faster than 1/100th of a second.
–
When you move the camera too slowly because the subject is moving slowly. (The
background will not become a blur.)
–
When the camera does not keep up with the subject satisfactorily.
].)
] is more difficult to achieve in the following cases.
205
].
] of the Optical Image Stabiliser
Advertisement
Table of Contents
