Table of Contents
Advertisement
Recording Modes
Setting the light source
∫
You can change the position and size of the light source.
1
Press [Fn2] to display the setting screen.
•
Setting screen can also be displayed by touching in order of [
2
Press 3/4/2/1 to move the centre position of the
light source .
•
The position of the light source can also be moved by
touching the screen.
•
The centre of the light source can be moved to the edge of
the screen.
Point for when placing the centre of the light source
A more natural appearance can be created by placing the centre of the light source
outside the image.
3
Adjust the size of the light source by rotating the rear
dial.
•
It can be changed to 4 different sizes.
•
The display can also be enlarged/reduced by pinching out/
pinching in.
•
Pressing [DISP.] or touching [Reset] returns the light
source setting to the default setting.
4
Press [MENU/SET] to set.
•
You can also set by touching [Set].
•
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are dropping.
124
] then [
].
Advertisement
Table of Contents
