Table of Contents
Advertisement
Stabiliser, Zoom and Flash
Using the Optical Image Stabiliser function of this unit
Applicable modes:
If your lens does not support the Optical Image Stabiliser function or is not based
on the Micro Four Thirds System standard/Four Thirds System standard, the
Optical Image Stabiliser of this unit can be used.
•
The Optical Image Stabiliser of this unit works only when taking pictures.
If your lens is not based on the Micro Four Thirds System standard/Four Thirds
System standard, make the following settings:
•
Set the [Shoot w/o Lens] to [ON].
•
Set the focal length of your lens in [Focal Length Set].
–
If a lens not based on the Micro Four Thirds System standard/Four Thirds System standard
is in use when the Optical Image Stabiliser of this unit is available, a confirmation message
for the focal length setting is displayed after this unit is turned on. Selecting [Yes] enables
you to set [Focal Length Set] in [Stabilizer].
1
Select the menu.
[MENU] > [Rec]>[Stabilizer]
2
Press 3/4 to select the item and then press [MENU/SET].
Item
[Operation
Mode]
[Focal
¢
Length Set]
¢ This item can be set only when your lens is not based on the Micro Four Thirds System
standard/Four Thirds System standard.
•
Exit the menu after it is set.
(P23)
Vertical and horizontal shake are compensated for.
[
]
([Normal])
Camera shake is corrected for up/down movements. This
mode is ideal for panning (a method of taking pictures
[
]
which involves turning the camera to track the
([Panning])
movements of a subject which continues to move in a
fixed direction).
[Stabilizer] does not work.
[OFF]
The focal length of your lens can be set or registered.
(P203)
(P207)
Description of settings
206
(P207)
Advertisement
Table of Contents
