Precautions; Connecting A Dial-Up Router To A Network - Lanier LD225 Network Manual

Precautions

Please pay attention to the following
when using the network interface
board. When configuration is neces-
sary, follow the appropriate proce-
dures below.
Connecting a Dial-Up Router
to a Network
When using NetWare (file server)
If the NetWare file server and printer
are on opposite sides of a router, pack-
ets are sent back and forth continuous-
ly, possibly incurring communications
charges. Because packet transmission
is a feature of NetWare, you need to
change the configuration of the router.
If the network you are using does not
allow you to configure the router, con-
figure the machine instead.
❖ Configuring the router
Filter packets so they do not pass
over the dial-up router.
Note
❒ The MAC address of the filter-
ing printer is printed on the
printer configuration page. For
more information about print-
ing a configuration page, see
Printer Reference.
❒ For more information about
configuring the printer if the
router cannot be configured, see
the following instructions.
Configuring the printer with NetWare
A
Following the setup method de-
scribed earlier in this manual,
configure the file server.
B
Set the frame type for NetWare
environment.
Reference
For more information about se-
lecting a frame type, see p.13
"Setting Up the Machine on a
Network".
Configuring the printer without NetWare
A
When not printing, the network
interface board sends packets
over the network. Set NetWare to
"inactive".
Reference
For more information about se-
lecting a protocol, see p.13 "Set-
t i n g U p t h e M a c h i n e o n a
Network".
When Using Network Utility
If the machine is connected to a net-
work, observe the following points
when setting up the machine or
changing settings:
For more details, see the operating in-
structions and Help for ScanRouter
V2 Professional and DeskTopBinder
Lite/Professional.
❖ When a dial-up router is connected in
a network environment
The settings for the delivery server
to be connected must be made ap-
propriately for the machine with
ScanRouter V2 Professional, Auto
Document Link, or DeskTopBind-
er Lite/Professional. In addition,
set up connected devices using the
I/O settings of ScanRouter V2 Ad-
ministration Utility.
Precautions
6
135