Edit The User Id; Edit The Access Group; Edit The Authentication Password - Radyne DMD20 Installation And Operation Manual

DMD20/20LBST Universal Satellite Modem
IMPORTANT
All entries are case-sensitive.
To set up a User Account, do these steps:

1. Edit the User ID.

2. Edit the Access Group.

3. Edit the Authentication Password.

F.1.1 Edit the User ID.
1. Select the User ID.
2. Press ENTER.
3. Move the cursor to the first character.
4. Press CLEAR and theright button to delete the characters.
5. Use the direction buttons and numeric keys to enter the new User ID.
6. Press ENTER to save the change.
F.1.2 Edit the Access Group.
1. Select ACCESS GROUP.
2. Press ENTER.
3. Press the  down button until you see the new Access Group.
4. Press ENTER to save the change.
F.1.3 Edit the Authentication Password.
1. Select AUTH PASSWORD.
2. Press ENTER.
3. Move the cursor to the first character.
4. Press CLEAR and theright button to delete the characters.
5. Use the direction buttons and numeric keys to enter the new authentication password.
6. Press ENTER to save the change.
MN-DMD20-20LBST Revision 14
Web Browser Setup Guide
F–4