Chapter 5. Rear Panel Interfaces; Dmd20/Dmd20 Lbst Connections - Radyne DMD20 Installation And Operation Manual

This section discusses the electrical interfaces available from the rear panel. All locations are as
viewed from the rear of the unit unless otherwise specified.
5.1

DMD20/DMD20 LBST Connections

All DMD20/DMD20 LBST connections are made to labeled connectors located on the rear of the
unit (refer to Figure 5-1 for the DMD20 and Figure 5-2 for the DMD20 LBST). The connector
definitions below are those on the DMD20/DMD20 LBST unit. Any connection interfacing to the
DMD20/DMD20 LBST must be the appropriate mating connector.
MN-DMD20-20LBST Revision 14
Chapter 5. REAR PANEL
INTERFACES
5–1