Actual Overhead Rate Calculation - Radyne DMD20 Installation And Operation Manual

DMD20/20LBST Universal Satellite Modem
3.14.4

Actual Overhead Rate Calculation

The following is the actual calculation the modem does to calculate the overhead ratio:
1. The modem calculates the minimum in-band rate to limit the size of the user data slots to
2,500 bits (the result is truncated to an integer).
Minimum In-Band = (User Data Rate * Control Ratio)/((Control Ratio + 1) * 250)
2. Using the bigger of Minimum In-Band or the selected In-Band, the modem calculates the
number of bits for each user data slot (result is truncated to an integer).
Slot Bits = (User Data Rate * (Control Ratio * 10))/(In-band Rate * (Control Ratio + 1))
Note: Slot bits of 0 are invalid.
The actual ratio the modem uses is:
Example 1:
Example 2:
MN-DMD20-20LBST Revision 14
Actual Ratio = (Slot Bits + 10)/Slot Bits
User Data Rate: 1,024,000 bps
In-Band Rate: 19,200 bps
Control Ratio:
Minimum In-Band = (1,024,000 * 7)/((7 + 1) * 250) = 3,584
than In-Band Rate)
Slot Bits = (1,024,000 * (7 * 10))/(19,200 * (7 + 1)) = 466
Actual Ratio = (466 + 10)/466 = 1.021
User Data Rate: 6,312,000 bps
In-Band Rate: 19,200 bps
Control Ratio:
1 to 7
1 to 7
Theory of Operation
(less
3–22