Table of Contents
Advertisement
Command/Response Tables for Audio SIS Commands
DSP control commands are an extension to SIS commands. They differ only in their data
string and the requirement to send each command with an "Au" suffix.
Symbol definitions
]
=
CR/LF (carriage return/line feed) (hex 0D 0A)
}
=
Carriage return (no line feed, hex 0D)
(use the pipe character,
=
Space character
•
|
=
Pipe (vertical bar) character
E
=
Escape key (hex 1B) (use W instead of Esc for Web browsers)
NOTE:
The dB values of the level settings are in 0.1 dB increments using negative numbers but not decimal
places. Multiply the desired level setting by ten for the SIS command value.
Example: To set an input level to 45.2 dB, use 452. To set an input level to -12.5 dB, use -125.
X6)
=
Gain and trim control or mix-point select
X6!
=
Level value in dB;
X6@
=
Input Polarity
X6$
=
Mute status
X6%
=
Group master group number
X6^
=
Group fader setting
X6&
=
Group fader increment
X6*
=
Group fader soft limit
X6(
=
Group type
X7)
=
Personal Identification Number (PIN)
|
, for Web browser commands))
Table 1. Level Control and Mix-point Selection Tables
See
"
dB value, in 0.1 dB increments using negative numbers but not decimal
places. The valid range depends on the type of gain block specified in the
X6)
command: The valid range depends on the control or mix-point.
a
= –180 to 240 (–18 to +24 dB)
b
= –1000 to 60 (–100 to +6.0 dB)
c
= –240 to 120 (–24 to +12 dB)
d
= –120 to 60 (–12 to +6.0 dB)
e
= –1000 to 0 (–100 to 0.0 dB)
0 = Standard
1 = Inverted
0 = unmute
1 = mute
01 – 16
dB value, in 0.1 dB increments using negative numbers but not decimal places.
The valid range depends on the type of gain block that is assigned to the group
X6%
number (
) specified in the command:
a
= -180 to 800 (-18.0 dB to +80.0 dB)
b
= -1000 to 120 (-100.0 dB to +12.0 dB)
c
= -350 to 250 (-35.0 dB to + 25.0 dB)
d
= -120 to 120 (-12.0 dB to +12.0 dB)
e
= -1000 to 000 (-100.0 dB to +0.0 dB)
NOTE:
Leading zeros are ignored.
dB value, in 0.1 dB increments, to raise or lower a group fader
dB value, in 0.1 dB increments. The valid range
for the gain block grouped in
6 = gain
12 = mute
Four numeric digits, default = 0000
DMP 44 LC • SIS Programming and Control
X6^
must be within the range
X6%
.
".
47
Advertisement
Table of Contents
