Dsp Configurator Program; Starting The Program - Extron electronics DMP 44 LC User Manual

2.
3.
USB driver installation is complete.

DSP Configurator Program

Starting the Program

1.
The USB driver installer launches. When the installer has completed the installation of
the USB drivers, the following screen appears:
Figure 28. Successful USB Driver Installation
Click Finish.
To run the DSP Configurator Program, click
Start > Programs > Extron Electronics > DSP Configurator
> DSP Configurator.
The DSP Configurator program starts in
Live Mode").
"Emulate Mode vs.
mode (see
Emulate
DMP 44 LC • Software Control 54