Special Characters - Extron electronics DMP 44 LC User Manual

X$
=
Baud rate
X%
= Internal temperature
X^
= Dirty status
X&
= Unit name
X*
=
Model name
X1)
= Preset number
X1@
= Inputs
X1#
=
Outputs
X1$
=
Group number
X1%
= Parameter number
X1^
= Soft limit High value
X1&
=
Soft limit Low value
X1*
=
Group master value

Special Characters

The HTML language reserves certain characters for specific functions. The device will not
accept these characters as part of preset names, the device name, or locally created file
names.
The DMP 44 LC rejects the following characters:
{space (spaces are acceptable for names)} + } ~ , @ = ' [ { } < > ' " semicolon (;)
colon (:) | \ and ?.
Command/Response Table for Basic DMP 44 LC SIS Commands
Command
NOTE: Commands can be entered back-to-back in a string, with no spaces. Example: TvprS25*11•3
General commands
Firmware Version, Part Number, and Model Information
Query firmware version
0 = 9600
1 = 19200
2 = 38400 (default)
3 = 15200
Degrees Celsius
0 = RAM has been saved to Flash (OK to power off/reset)
1 = RAM needs to be saved to Flash
A text string of up to 24 characters drawn from the alphabet (A–Z) digits (0–9),
minus sign/hyphen (-). No blank or space characters are permitted as part of the
name. No distinction is made between upper and lower case. The first character
must be an alphabet character. The last character must not be a minus sign/
hyphen.
16 presets (1–16)
Four inputs (1–4)
Four outputs (1–4)
Sixteen groups (1–16)
6 = G, 12 = M
For gain values with a resolution to 0.1, multiply by 10.
Mute values: 0=Mute or 1 = unmute.
ASCII Command
(Host to Tuner)
Q
Response
(Tuner to Host)
X! ]
DMP 44 LC • SIS Programming and Control
Additional Description
Show the current firmware
version.
42