Table of Contents
Advertisement
3.
Select a preset number. In the Preset Name field, unused presets are named
"unassigned." To create a new preset, select an unused preset number and type a
preset name. If no name is entered, a default name will be assigned. To overwrite an
existing preset, select a preset with a name other than "unassigned."
Figure 33.
Click OK to save the preset, or Cancel to stop the save preset operation.
4.
Managing Presets in the GUI
After the preset is created (whether or not the DSP Configurator file is saved), it appears in
the preset list, available from the presets bar.
In Live and Emulate mode, after a preset is selected from the list, action buttons become
available next to the presets bar.
The user can either Recall (make the preset active), Cancel (return to the current emulation
or state) or Delete the preset.
In Live mode selecting Recall first applies the currently displayed preset elements
("marked" elements) from the stored preset and overwrites that portion of the current
state, then switches the drop-down list to read "Current State."
In Emulate mode, the Recall action button applies the currently displayed preset
elements ("marked" elements) from the file and overwrites the information contained
in DSP Configurator as the current emulation, then switches the drop-down list to read
"Current Emulation."
Save Preset
DMP 44 LC • Software Control
62
Advertisement
Table of Contents
