Command Interface Post Commands - CyberData 11180 Operation Manual

2.4 Command Interface
Some functions on the device can be activated using simple POST commands to the web interface.
The examples in
commands to the device should work.

2.4.1 Command Interface Post Commands

Note
Device Action
Trigger relay (for configured delay)
Place call to extension (example: extension 130)
Terminate active call
Force reboot
Test Audio button
Announce IP address
Play the "0" audio file
Play the "1" audio file
Play the "2" audio file
Play the "3" audio file
Play the "4" audio file
Operations Guide
Table 2-21 use the free unix utility, wget, but any program that can send http POST
These commands require an authenticated session (a valid username and password to
work).
Table 2-21. Command Interface Post Commands
930468A
HTTP Post Command
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"test_relay=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"call=130"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"terminate=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"reboot=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"test_audio=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"speak_ip_address=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_0=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_1=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_2=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_3=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_4=yes"
Installing the VoIP V2 Speaker
Command Interface Post Commands
a
CyberData Corporation
70