Monitor Mode - CyberData 11180 Operation Manual

1.9.2 Monitor Mode

• In Monitor Mode, the person on the phone can listen to any activity that is occurring near the
Push-to-Talk Speaker. See
Sound, noise, or
activity near the
V2 Speaker
• The Call Button is not used during Monitor Mode.
• Monitor Mode is controlled by the phone instead of the Push-to-Talk Speaker.
• To initiate the Monitor Mode, someone on a phone must dial the pre-programmed Monitor
Extension. See
Operations Guide
Figure 1-9.
Figure 1-9. Monitor Mode
Talkback
Speaker
Figure 1-10.
Figure 1-10. Dial the Monitor Extension
930468A
Push-To-Talk Speaker Modes
IP Phone
Dial the pre-programmed
Monitor Extension
CyberData Corporation
Product Overview 8