Socket CF RFID User Manual page 32

4. RFID Demo will report any data saved to the RFID tag, as well
as the type of tag and number of bytes per block. The bottom
of the screen will report the read status and tag ID.
5. To write data to the tag, enter text into the bottom field. The
type and amount of text that can be written varies depending
on your tag type. After entering text, hold the Pocket PC in
the correct reading/writing position and tap Write Tag.
Note:
• The number of characters in the Write Tag field must
match the number of bytes per block multiplied by the
number of blocks, or an error will occur.
• See Appendix B to find out the type and amount of text
that can be written to your tag.
• The most common cause of write failures is either an
incorrect "start block" or number of blocks.
32