Socket CHS 7X User Manual
  1. Manuals
  2. Brands
  3. Socket Manuals
  4. Barcode Reader
  5. CHS 7X
  6. User manual

Socket CHS 7X User Manual

Bluetooth
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Guide
®
Bluetooth
© 2009 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, SocketScan, Connect!Agent, ActivePairing, Socket Bluetooth
Cordless Hand Scanner, and Business Mobility Now! are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word
mark is a registered trademark of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is under license. All other trademarks
and trade names contained herein may be those of their respective owners.
Basic Functionality
*Note that no software is required for normal operation
Function
Powering on /off
Scanning
bar
codes
Factory Reset
Pairing Reset
Retrieving Scanner and Firmware information
1.
Power on CHS and pair via Bluetooth with system.
2.
Open Notepad or Notes application and set cursor in application.
3.
Press and hold down Trigger button for 15 seconds or until information
outputs in text into Notepad /Notes application.
CHS
7X, 7XRx
Procedure(s)
Power On: Press and hold down the
power button until you hear two (low-high)
tones.
Power Off: Press and hold down the
power button until you hear two (high-low)
Press and release Trigger button when
scanning bar codes. The scanner will beep,
flash LED, and vibrate confirming the bar
code
has
been
decoded
and
transferred to the paired system.
Reverts CHS back to factory default state.
1.
Power on CHS
2.
Press
and
hold
down
Trigger button and momentarily
press the Power button while
still holding down the Trigger
button.
3.
After 15 seconds, a single beep
following a series of 5 tones will
play
confirming
Releases the Bluetooth pairing from the last
system the scanner was paired to. This
allows new pairing to another system.
1.
Power on CHS
2.
Press and hold down the
Trigger button and press the
Power button until you hear a
series of 3 tones.
System Requirements:
1. HID with Keyboard Translation support
2. Any of the following OS platforms:
-Windows Mobile/CE 5 or 6.1
-Windows 7/Vista/XP
LED
OR
Any of the following devices:
Trigger button
-Socket SoMo
-Dell Axim 51v with WM/CE 5
-HTC with WM/CE 6.1
3. Bluetooth support with any of the following stacks:
Power button
-Microsoft SP3 BT v2.0
-Microsoft BT v2.1 with Win 7
-Toshiba BT v2.0, v1.2, v1.1
-Broadcom BT v2.0
-BlueSoleil v2.3.00 or v5.4.11 BT v2.0
Package Contents
•
•
•
LED
LED
Bluetooth
Status (Blue)
data
Good Read
(Green)
the
Battery
Status (Red)
reset
is
Beeps
Beep Patterns
2 beeps (low-high)
2 beeps (high-low)
1 beep (with Blue LED)
1 beep following 2 beeps
(same tone)
3 downstream beeps
1 beep following series
of 5 beeps
1 Socket Bluetooth Cordless Hand Scanner
1 Rechargeable Li-ion Battery installed (do not remove)
1 Charging cable (Cradle not included)
LED Behavior
Meaning
1 blink per
Bluetooth radio is on, but not
second
connected
1 blink per 5
Scanner connected to system
seconds
1 blink per
Data successfully scanned and
scan
transmitted to host device
On solid
When charging and is fully
charged
1 blink per
When battery is low
second
On solid
Battery in process of charging
Off
Off or Good Battery status
Meaning
Power on
Power off
Initial connection to system
Re-connection to last paired system
Pairing Reset completed. Scanner will
power off
Factory Reset completed. Scanner will
power off

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHS 7X and is the answer not in the manual?

Questions and answers

Related Manuals for Socket CHS 7X

Summary of Contents for Socket CHS 7X

  • Page 1 Cordless Hand Scanner, and Business Mobility Now! are registered trademarks or trademarks of Socket Mobile, Inc. The Bluetooth word mark is a registered trademark of the Bluetooth SIG, Inc. USA, and any use by Socket Mobile, Inc. is under license. All other trademarks and trade names contained herein may be those of their respective owners.

  • Page 2: Assembling The Ac Adapter

    AC A SSEMBLING THE DAPTER The AC adapter included with the Bluetooth CHS includes four international plugs. Simply find the correct plug for your region and slide it into the head of the adapter. HARGING THE CANNER Use the AC adapter or charging cradle, if included, to charge the Bluetooth Cordless Hand Scanner. Alternatively, you can use a car charger or the Mobile Power Pack (all available separately).

  • Page 3: Windows 7, Vista And Xp

    OMPUTER Note: Refer to your Bluetooth hardware/software documentation for full instructions. 1. If using an add-on Bluetooth card or adapter, such as the Socket Scanning Companion USB adapter, plug it in your computer. 2. Start your computer’s Bluetooth software. For some computers, the Bluetooth software will automatically launch after turning on the Bluetooth radio.

  • Page 4: Step 3: Configure Bluetooth Settings

    Bluetooth devices in range and report found devices. a. After the search, select Socket CHS 7x [xxxxxx]. Click Next. Note: The characters in brackets are the last 6 characters of the scanner’s Bluetooth Device Address for the Bluetooth CHS 7X or 7XRx...
  • Page 5 2. A passkey or pairing option screen will appear. Select Enter the device’s pairing code and enter the default PIN 0000 (Be sure to enter four zeroes, not the letter "O"). Click Next. 3. Your system will confirm the scanner has been successfully added and will connect to the scanner. Status balloons will appear, reporting the connection progress.
  • Page 6 Bluetooth devices in range. 4. In the list of devices, select Socket CHS 7x [xxxxxx]. Click Next. Note: The characters in brackets are the last 6 characters of the scanner’s Bluetooth Device Address for the Bluetooth CHS 7X or 7XRx.
  • Page 8 2. After the device search, select the Bluetooth CHS 7x, which will appear as Socket CHS 7x [xxxxxx]. Note: The characters in brackets are the last 6 characters of the scanner’s Bluetooth Device Address for the Bluetooth CHS 7X or 7XRx 3.

  • Page 9: Windows Mobile

    ETUP FOR INDOWS OBILE STEP 1: T URN ON THE LUETOOTH Press and hold the small power button until the LED turns blue and the scanner beeps twice (low-high). The LED should blink blue once per second to show that the Bluetooth radio is on but not connected. Time after turning on scanner Bluetooth mode 0-5 minutes Discoverable and connectable...
  • Page 10 4. After the device search, select the Bluetooth CHS 7x, which will appear as Socket CHS 7x [xxxxxx]. Note: The characters in brackets are the last 6 characters of the scanner’s Bluetooth Device Address of the Bluetooth CHS 7X or 7XRx.

  • Page 11: Default Symbologies

    YMBOLOGIES DEFAULT SYMBOLOGIES Below is a list of symbologies that are enabled by default. To enable/disable symbologies, please refer to the Bluetooth CHS 7X, 7XRx Command Sheet included with your beta unit. 2D Symbology Bar Code Symbology Bar Code Example...
  • Page 12 Postal Symbology Bar Code Symbology Bar Code Example Postnet Australian Postal (4-State Bar code) Dutch Postal BPO 4 State Code...

  • Page 13: Appendix A Specifications

    PPENDIX PECIFICATIONS The following specifications are for the Bluetooth CHS 7X, 7XRx. Physical Characteristics Dimensions: • 137 L x 31 H x 37 W mm (5.3 L x 1.2 H x 1.5 W inches) Total Mass: approx. 68 g (2.4 oz) Power Source: •...
  • Page 14 • Human bodies or containers of liquid positioned between the host and the Socket Bluetooth CHS. • The presence and activity level of competing Bluetooth or 802.11 (Wi-Fi) systems using the same 2.4 GHz frequency.

  • Page 15: Appendix B Safety And Usage Tips

    • Treat your product with care. Keep in a clean and dust-free place. • Changes or modifications of this product, not expressly approved by Socket, may void the user’s authority to operate the equipment. Cleaning the Bluetooth CHS 7 Rx Series •...

  • Page 16: Regulatory Compliance

    Regulatory Compliance The Socket Bluetooth Cordless Hand Scanner (CHS) is designed to be compliant with the rules and regulations in locations where they are sold and will be labeled as required. This product is type approved — users are not required to obtain license or authorization before using.

This manual is also suitable for:

Chs 7xrx

Table of Contents