Socket CF RFID User Manual page 21

Trigger mode:
• Tag ID Only: Select to read only the tag ID.
• Read Data Only: Select to read only data from the tag
memory.
• Tag ID & Read Data: Select to read both the tag ID and
tag memory.
Starting block: If you selected a Read Data option, enter
the number of the first block you want to begin reading.
Number of blocks: If you selected a Read Data option,
enter the number of blocks you want to read.
Read error string: Enter the string you want your application
to display in case the RFID reader cannot read the tag data.
Tag type: Select the type of RFID tag you want to read. The
Auto Detect setting enables all tag types to be read.
Choosing a specific tag may result in a longer read range and
faster read.
Inventory mode: Check for the RFID reader to read all tags
present in an RFID field, if supported by the tag type.
Display tag ID prefix: Check to display the RFID tag ID prefix
with each tag ID. The prefix indicates the tag type.
Displayable characters only: Check for the RFID reader to
read only displayable characters while reading data from the
tag memory. Otherwise, the RFID reader will also read "filler"
symbols used in memory blocks that aren't completely filled
with data. This option is only available if you selected a Read
Data trigger mode.
7. After selecting all of your Prefix/Suffix, Sound and RFID settings, tap ok.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 21