Step 6: Verify Card Mode; Step 7: Open Application - Socket CF RFID User Manual

STEP 6: Verify Card Mode

If you are using the dual-function CF RFID Reader-Scan Card
6M/6P, and you did not assign buttons to Trigger ISC or Trigger
RFID, make sure the card is in the correct mode you wish to use.
The SocketScan icon at the bottom of the Today screen indicates
your current mode.
To switch modes, do either of the following:
• If you assigned a button to Trigger Select, press the button.
• Tap on the SocketScan icon. In the pop-up menu, tap to select
the card mode you want.

STEP 7: Open Application

Start the application that you want to receive the data (e.g.,
Excel, Notepad, etc.). Make sure a document or spreadsheet is
open. Place the cursor where you want to enter data.
Note: If reading RFID tags into Excel Mobile, you may want to
widen the cells to fit the full tag ID, which may exceed 20
characters.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 15