Socket CF RFID User Manual page 18

Series 6

Table of Contents

When data is read, a beep should sound indicating a good read,

and data should appear in your application.

For example, in an Excel Mobile spreadsheet, data should appear

in the cell you highlighted. The next cell should now be

highlighted, ready for the next scan/read.

If the card fails to read data within a few seconds, you must

try again.

Note: By default, the RFID reader will return the tag ID. The

RFID Setup utility can be used so that the RFID Reader-Scan

Card returns only the tag data, or the tag ID plus the tag data.

(See the next page for instructions.)

Table of Contents