Step 2: Install The Software - Socket CF RFID User Manual

STEP 2: Install the Software

ADVANCED USERS: Refer to the README file for CAB file
installation instructions..
Note: If you are using the SoMo 650, software installation is not
necessary. SocketScan is pre-loaded on the device.
Follow these instructions to install SocketScan. Afterwards, you
can use the same process to install RFID Demo and/or Floating
Trigger.
4. Use a serial/USB cable or cradle and the appropriate Microsoft
synchronization software to make an active connection
between your device and a host PC.
5. Insert the installation CD into your host PC.
6. Use My Computer or Windows Explorer to access your CD-
ROM drive. In the CD, click on SETUP.EXE.
7. The SocketScan Setup Center will appear in your web browser.
Read the first page and click Installation in the left margin.
8. In the SocketScan Installation page, in the Windows CE
section, click Install In the first paragraph.
CHAPTER 2: SETUP FOR WINDOWS MOBILE 9