C Bar Code Label Specifications - Socket CF RFID User Manual

Appendix C
Bar Code Label Specifications
All bar code symbols/labels should satisfy the appropriate AIM Uniform Symbology
Specification.
Background Substrate:
The bar code symbol should be printed on material (media) that is reflective and has a matte
(not glossy) finish. A background diffuse reflectance of at least 70% to 80% is desirable for
optimum contrast. Retro-reflective media should be used to obtain decode distances greater
than 36 inches.
Ink Color and Type:
The inked bars should not exceed 25% reflectance at the wavelength that is being used for
reading, whether printed with black ink or colored ink. The reflectance value should not
vary more than 5% within the same character.
Voids and Specks:
The code should be printed clearly, free of voids, specks, blemishes and lines that could
"fool" the scanner. Specks or blemishes in the white spaces, or false or missing bar sections
could be interpreted by the reading equipment as part of the code. Generally, the width of
such flaws is more serious than the height. Code symbols/ labels should be rejected if these
defects are present.
Definition:
The bars in the bar code symbol should be well defined. Their edges should not be rough or
fuzzy, so that the bars and spaces have the proper widths intended for the bar code
symbology used.
Contrast:
Background reflectance (that of the substrate on which the codes are printed) should always
provide a good contrast relative to the ink reflectance (that of the code bars). The difference
between the two should be at least 37.5% at the wavelength used for reading.
Tolerance:
The ratio of the widths of bars and spaces in a bar code symbol must conform to the
appropriate AIM bar code specifications and can cause problems if not correct throughout
the bar code. Problems can occur when bar edges are smeared or rough, or when they
exhibit voids.
APPENDIX B: BAR CODE LABEL SPECIFICATIONS | 45