Hot-Swap Hard Disk Drive Backplane - Lenovo ThinkServer TD330 Manual

ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter)
The following illustration shows the connectors on the ThinkServer RAID 700 Adapter.
Figure 18. ThinkServer RAID 700 Adapter
1
Ports 7-4
2
Ports 3-0
1 Ports 7-4
Used to connect a mini-SAS signal cable. See "Connecting the cables" on page 39.
2 Ports 3-0
Used to connect a mini-SAS signal cable. See "Connecting the cables" on page 39.
3
External connector
Used to attach the cable that connects a RAID card to the system board hard disk drive LED connector. See
"Connecting the cables" on page 39.
4 ThinkServer RAID 700 Battery connector
Used to connect a ThinkServer RAID 700 Battery. See "Installing or removing the ThinkServer RAID 700
Battery" on page 102.

Hot-swap hard disk drive backplane

Your server comes with one of the following hot-swap hard disk drive and backplane configurations:
• Five to eight 3.5-inch hot-swap SATA or SAS hard disk drives with two backplanes
• Up to four 3.5-inch hot-swap SATA or SAS hard disk drives with one backplane
• Up to eight 2.5-inch hot-swap SAS hard disk drives with one backplane
3
External connector
4
ThinkServer RAID 700 Battery connector
.
Chapter 3 Product overview
35