Lenovo ThinkServer TD330 Manual page 57

7
Power Management Bus (PMBus) connector
8
System fan 2 connector
9
Microprocessor socket 1
10
Microprocessor 1 fan connector
11
Microprocessor 1 power connector
12
System board battery
13
Platform Controller Hub (PCH)
14
System fan 1 connector
15
SAS connector 4-7
16
SATA connector 1
17
SATA connector 0
18
SAS connector 0-3
19
SATA SGPIO connector
20
Internal USB Type A connector
1 System fan 3 connector
Used to connect the rear system fan cable.
2 Microprocessor socket 2
9 Microprocessor socket 1
If the server has two microprocessors, each of the microprocessor is secured in the microprocessor
socket on the system board and a heat sink and fan assembly is installed above the microprocessor to
provide cooling. If the server has only one microprocessor, the microprocessor socket 2 is protected by a
microprocessor socket cover.
3 Microprocessor 2 fan connector
Used to connect the heat sink and fan assembly 2 cable.
4 Microprocessor 2 power connector
Used to connect the power connector of the power supply to provide power to the microprocessor installed
in the microprocessor socket 2.
5 Memory slots (6)
40
Memory slots (6)
Your server system board provides 12 memory slots to support up to 12 memory modules. For more
information, see "Memory module installation rules" on page 85.
6 Main power connector
Used to connect the power connector of the power supply to provide main power to your server.
27
TPM connector
28
Intelligent Diagnostics Module connector
29
Front panel connector
30
Internal USB connector 2
31
Internal USB connector 1
32
iButton socket
33
PCI card slot (PCI slot 1)
34
PCI Express x8 card slot (PCI-E slot 2)
35
PCI Express x8 card slot (PCI-E slot 3)
36
ThinkServer Management Module
37
PCI Express x8 card slot (PCI-E slot 4)
38
PCI Express x8 card slot (PCI-E slot 5)
39
PCI Express x16 card slot (PCI-E slot 6)
40
Memory slots (6)
.
Chapter 3 Product overview
43