Lenovo ThinkServer TD330 Manual page 50

The following illustration shows the locations of the hot-swap hard disk drive backplanes. You need to open
the server cover and remove the front system fans to access the backplanes. See "Removing the server
cover" on page 77 and "Replacing the front system fan 1" on page 161.
Notes:
1. Depending on the model, your server might look slightly different from the following illustration.
2. The following illustration is based on server models that have five to eight 3.5-inch hot-swap SATA or
SAS hard disk drives with two backplanes
Figure 19. Hot-swap hard disk drive backplane locations
Backplane for 3.5-inch hot-swap hard disk drives
This topic provides information to help you locate the connectors on a 3.5-inch hot-swap hard disk drive
backplane.
36
ThinkServer TD330 Hardware Maintenance Manual
1 .