b) Click the up/down arrow button to move the tray up or down in the priority list.
c) Repeat the above two steps for each tray attached to your machine.
Note
You cannot set the same paper tray for more than one priority level at a time.
7. Select OK to save your changes and close the System Settings window.
8. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator
Output Devices
This tab is available only when specific finishing devices are attached, such as the High
Capacity Stacker or the Perfect Binder.
Related Topics:
High Capacity Stacker Settings
Perfect Binder Settings
Selecting the Output Device options
®
Xerox
Color 800/1000 Press
System Administration Guide
System Settings
5-21