Xerox Color 1000 Press System Administration Manual page 82

Profiles
It is recommend that you use a name such as Single Fold Plain or something that
indicates the fold type.
6. From the pull-down menu, select the desired fold type.
7. Select desired settings such as Size, Coating, and Weight.
8. Select the Next button.
The next Fold Adjustment Test Print window displays.
9. Select the desired tray, and then select the Start button.
A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the next Fold Adjustment Test Print screen displays.
This screen will vary depending on the selected Fold Type.
10. Obtain the printed samples from the output area of the machine.
11. Measure the sample output and record both z-fold, half-sheet positions on a sheet
of paper.
12. Enter the measurement values that you obtain during the previous step in the "A"
Length window and/or the "B" Length window by using the up/down arrow buttons.
13. Select the Start button.
A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the following window appears:
6-24 ®
Xerox Color 800/1000 Press
System Administration Guide