Nvm Read/Write; Using The Nvm Read/Write Feature - Xerox Color 1000 Press System Administration Manual

NVM Read/Write

Under most conditions, this feature is not used by system administrators. Your Xerox
service representative may use it to change certain system settings.
It is recommended that you do not enter any numbers on this screen before consulting
with your Xerox service representative. Entering numbers on this screen may change
system settings which may result in a service call to restore the system to the correct
settings.
Related Topics:

Using the NVM Read/Write feature

Using the NVM Read/Write feature
1. Logon as Administrator.
2. Select the System Settings button.
3. Select the System tab.
4. Select the NVM Read/Write button.
The NVM Read/Write window opens.
5. Enter the desired, six-digit Chain Link Number.
a) Using the numbers on the keyboard, enter the Chain Number.
b) Press the Tab button on the keyboard to advance to the Link field.
c) Enter the Link number.
d) Select the Next button.
The Enter the New Value window displays.
®
Xerox Color 800/1000 Press
System Administration Guide
System Settings
5-13