Charge Corotron Cleaning - Xerox Color 1000 Press System Administration Manual

Perform the following steps to clean one or all of the dry ink/toner cartridge dispensers.
Note
It is recommended that you run a few test prints before performing the cleaning
procedure. After the Start Cleaning button is selected, the system automatically generates
a test print. This allows you to compare the before and after prints for image quality.
1. Logon as Administrator.
2. Select Maintenance from the main UI.
The Maintenance window opens.
3. Select the Maintenance tab.
4. Select the desire dry ink/toner(s) to be cleaned.
5. Select the Start Cleaning button to begin the cleaning process.
6. Select the desired paper tray and feed orientation (Long Edge Feed, or Short Edge
Feed).
7. Select the Start button to begin.
When the process is complete, a "Cleaning is complete" message will appear on the
screen.
8. Select the Close button to exit and return to the main UI.
Related Topics:
Logging on as Administrator

Charge corotron cleaning

Perform the following steps to clean one or all of the charge corotrons.
1. Logon as Administrator.
2. Select Maintenance from the main UI.
The Maintenance window opens.
3. Select the Maintenance tab.
4. Select the desire corotron(s) to clean.
5. Select the Start Cleaning button to begin the cleaning process.
When the process is complete, a "Cleaning is complete" message will appear on the
screen.
6. Select the Close button to exit and return to the main UI.
Related Topics:
Logging on as Administrator
®
Xerox Color 800/1000 Press
System Administration Guide
Maintenance on UI
2-3