Auto Resume After Pause - Xerox Color 1000 Press System Administration Manual

The system default is enabled (checked) for the Print Engine Only and Print Engine
Only If No PC Communication For options.
5. Use the up or down arrow buttons to change the time for each of the power saver
features:
• System PC & Print Engine
• Print Engine Only
• Print Engine Power Only If No PC Communication For
The range available is 1-240 minutes.
Note
The system default time is 60 minutes for System PC & Print Engine and Print Engine
Only. The system default time for Print Engine Only If No PC Communication For is
ten minutes.
6. Select the desired Exit Power Saver option.
7. Select OK to save your changes and close the System Settings window.
8. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator

Auto resume after pause

Use the Auto Resume After Pause feature to restart a job automatically after the Pause
button is selected on the UI and the job is waiting for user instruction.
1. Logon as Administrator.
2. Select the System Settings button.
3. Select the System tab.
4. For the Auto Resume After Pause option, use the up or down arrow buttons to change
the time (minutes and seconds). The range for minutes is 0-60, and the range for
seconds is 0-59.
The system default time is two minutes.
5. Select OK to save your changes and close the System Settings window.
6. To exit the Administrator mode, select the Logoff button.
Related Topics:
Logging on as Administrator
®
Xerox Color 800/1000 Press
System Administration Guide
System Settings
5-17