Xerox Color 1000 Press System Administration Manual page 66

Profiles
c) Print quantity
It is recommended that you select a quantity of 10 test prints in order to best
evaluate the printed output.
d) Long Edge Feed or Short Edge Feed
11. Select Start.
The UI displays a message telling you the test print is in progress.
12. Retrieve your printed output.
Discard the first few prints as inconsistency tends to be greater with these first images.
13. Evaluate the test prints by holding your the output at eye level near a light source.
This allows you to see the registration marks for side 1, and side 2 (if 2 sided output
was selected).
a) If you determine that the alignment between side 1 and side 2 is unacceptable
and needs adjusting, repeat this procedure.
It may take multiple adjustments to the Alignment options and running test prints
before the printed output meets customer satisfaction.
b) Once the printed output is acceptable, continue to the next step.
14. Select OK to save and close the alignment Profile Properties window.
The new/edited profile procedure (for example, AlignmentProfile2) is displayed on
the Alignment window and can be selected at any point of need in the future.
15. Select Close to exit Profiles and return to the main UI.
16. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator
6-8 ®
Xerox Color 800/1000 Press
System Administration Guide