Correcting The Paper Curl - Xerox Color 1000 Press System Administration Manual

Select the desired settings for two-sided only print jobs.
• 2 Sided Face Down Curl Correction: Select either Default or from the Custom
pull-down menu, select the setting that best describes the curl issues on your 2-sided
output.
• Front Print Density: Enter the desired print (dry ink/toner) density amount as required;
amounts range from zero to seventy percent. If your output is a high dry ink/toner
coverage area on the output, you may want to enter a higher print density amount.
The system default value is 10%.
• Black Print Density: Enter the desired print (dry ink/toner) density amount as required;
amounts range from zero to seventy percent. If your output is a high dry ink/toner
coverage area on the output, you may want to enter a higher print density amount.
The system default value is 10%.
Tip
You may need to run several test prints, evaluate the output, and readjust the values
before achieving your desired output.

Correcting the paper curl

Use this procedure when selecting/setting paper curl correction options for a stock entry
(either a new permanent stock or a modification to an existing stock).
1. Logon as Administrator.
2. Select Stock Library.
®
Xerox Color 800/1000 Press
System Administration Guide
Paper curl correction
4-5