Finishing Devices - Xerox Color 1000 Press System Administration Manual

14. Select either:
a) Done Adjusting: Select this if the output meets customer satisfaction.
This closes the current window and returns you to the main Fold Adjustment
window. The new/edited fold adjustment profile is displayed in the Fold Adjustment
window.
b) Continue Adjusting: Select this if the output does not meet customer satisfaction
and requires further adjusting.
This returns you to the The Fold Adjustment - Test Print window where you can
make further adjustments and run additional test prints. Repeat this step as
required until the desired output is achieved. The new/edited fold adjustment
profile is displayed in the Fold Adjustment window.
15. Select Close to exit Profiles and return to the main UI.
16. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator

Finishing Devices

If your machine has an optional, third-party, Digital Finishing Architecture (DFA) device
attached, then this profile feature is available.
®
Xerox Color 800/1000 Press
System Administration Guide
Profiles
6-25