Stopping And Securing The Vehicle; Removing The Jack And Tools - Ford Escape 2009 Owner's Manual

Roadside Emergencies

Stopping and securing the vehicle

1. Park on a level surface, set the
parking brake and activate hazard
flashers.
2. Place gearshift lever in P (Park)
(automatic transmission) or R
(Reverse) (manual transmission)
and turn engine off.

Removing the jack and tools

The jack and tools are located under
the carpeted load floor.
Pull back the carpet away from the
liftgate, and remove the hardboard
cover. If your vehicle is equipped
with a cargo management system,
the jack and tools are in the forward
compartment under a lid.
Unbuckle the strap and remove the
jack and tools by pulling the right
side up first. Remove the tools from
the jack in order to remove the
spare tire from under the vehicle.
238
2009 Escape (204)
Owners Guide (own2002), 3rd Printing
USA (fus)